Overview

ZTE has expanded its high-efficiency AI data center (AIDC) infrastructure portfolio with an 800V high-voltage DC power system and a high-capacity liquid-cooling coolant distribution unit (CDU). The announcement, reported by Rocket Punch on November 17, 2026, positions the vendor against a backdrop of rising rack power densities that are straining conventional datacenter power and cooling architectures. ZTE says the combination is designed to cut conversion losses and support racks well beyond the 10–20 kW range typical of traditional datacenters. The company points to the Nanjing Binjiang datacenter upgrade, where liquid-cooled racks reach up to 60 kW, as an early validation of the architecture.

Technical Details

At the core of ZTE’s approach is a shift from conventional AC power distribution to an 800V DC bus. Traditional datacenter power chains typically involve multiple conversion stages—from utility AC to UPS, then to server power supplies—each introducing losses. An 800V DC architecture can reduce the number of conversions and lower distribution losses, while also simplifying power delivery to high-density racks. Higher voltage also reduces current for a given power level, which can reduce cable size and resistive losses. ZTE pairs this with a high-capacity liquid-cooling CDU, which manages coolant flow and heat exchange for liquid-cooled IT equipment. The CDU is a critical component for direct-to-chip or rear-door heat exchangers, enabling heat capture closer to the source. Together, the 800V DC power system and liquid-cooling CDU form an integrated infrastructure layer aimed at supporting racks that exceed the air-cooled, low-voltage norms of the past.

ZTE positions the architecture around several potential benefits:

  • Reduced conversion stages between the utility feed and IT equipment, which can lower cumulative power losses.
  • Lower current at 800V DC for a given power level, which can reduce cable size and resistive losses.
  • Integrated liquid cooling for racks that exceed the practical limits of air cooling.

Market Context

The datacenter industry is undergoing a power-density inflection. AI training and inference workloads, driven by accelerators and high-bandwidth networking, are pushing rack power consumption upward. Traditional datacenters designed for 10–20 kW racks often rely on air cooling and conventional AC distribution; these designs struggle as densities rise. Liquid cooling has moved from niche to mainstream consideration, and high-voltage DC distribution is gaining attention as a way to improve efficiency and reduce copper use. ZTE’s announcement fits this broader shift. By offering both power and cooling components, the company is addressing two of the most significant bottlenecks for AI-ready datacenters. The Nanjing Binjiang deployment, with liquid-cooled racks up to 60 kW, illustrates the direction of travel: higher density, liquid cooling, and more efficient power delivery.

Industry Impact

ZTE’s move could influence how infrastructure vendors bundle power and cooling. Historically, power distribution and cooling were separate domains, often sourced from different suppliers. An integrated 800V DC and liquid-cooling offering may push competitors to align roadmaps and simplify operator integration. It also signals that high-voltage DC is moving from concept to commercial deployment in AI datacenters. For operators, the appeal is reduced conversion losses and the ability to support denser racks without proportional increases in electrical infrastructure. However, adoption will depend on ecosystem readiness: servers, power shelves, and CDUs must support 800V DC input, and site electrical designs must accommodate DC distribution. ZTE’s validation at Nanjing Binjiang provides a reference point, but broader industry impact will hinge on standardization and supply-chain maturity.

Implications for AI Data Centers

AI data centers are characterized by high power density, sustained utilization, and a need for efficient heat removal. At 60 kW per rack, air cooling becomes impractical; liquid cooling is essential. The 800V DC architecture complements liquid cooling by delivering power more efficiently to dense compute nodes. Lower conversion losses matter at scale: even small efficiency gains can translate into significant energy savings across a large facility. The combination also supports higher power availability per rack, which is necessary for multi-GPU servers and high-performance networking. ZTE’s emphasis on the Nanjing Binjiang upgrade suggests that the architecture is being tested in a real deployment rather than only in a lab. For AI operators, the key implication is that power and cooling must be designed together, not as separate afterthoughts.

Future Outlook

ZTE’s strengthened AIDC infrastructure portfolio is a signal that the vendor intends to compete in the high-density datacenter market. The next steps will likely involve expanding the ecosystem around 800V DC and liquid cooling, including compatibility with a wider range of IT equipment and broader deployment references. Industry adoption will depend on standards development, operator confidence, and the availability of skilled personnel for liquid-cooling maintenance. The Nanjing Binjiang project provides an early validation, but the market will look for additional deployments and performance data. As AI workloads continue to drive rack densities upward, integrated power and cooling architectures like ZTE’s are likely to become a baseline requirement rather than a differentiator. The company’s move underscores a broader industry transition toward higher voltage DC and liquid cooling as foundational elements of AI-ready datacenters.