Overview: A Basic Agreement to Bring 800VDC to Japan

On November 18, Rohm and Delta Electronics announced a basic agreement aimed at the social implementation of high-voltage direct-current power delivery for AI data centers. The two companies will combine Delta's power-system expertise with Rohm's semiconductor portfolio to promote 800VDC solutions and to help form a market for them in Japan. The scope is broader than component supply: the partners will jointly organize the required specifications and system requirements for the power conversion equipment and distribution facilities that make up an 800VDC architecture, and they will pursue joint customer proposals, business development, marketing, and awareness activities. The agreement was reported by TECH+ on November 19, 2026.

Why 800 Volts: The Physics Behind the 1MW Rack

The motivation is arithmetic. Traditional server racks have drawn on the order of 10kW, but AI workloads have pushed racks past 100kW, and future racks are expected to approach 1MW. Because power equals voltage multiplied by current, delivering that power at low voltage demands very large currents. The consequences compound: power supplies and power wiring grow in size, resistive losses and heat generation rise, and the space available for the AI accelerators themselves is squeezed.

The 800VDC architecture addresses this by distributing 800V DC to the immediate vicinity of the rack and converting to the required voltage close to the accelerator. Raising the voltage suppresses current, and with it losses, heat, and the bulk of distribution equipment. Delta has estimated that adopting 800VDC can cut the copper used in power wiring by roughly 45%. Reducing the number of conversion stages relative to conventional power architectures also improves overall system efficiency.

Delta's "From Grid to Chip" Architecture

Delta frames its approach as "From Grid to Chip," treating the path from the utility grid to the accelerator as a single integrated problem. On the power-infrastructure side it offers solid-state transformers (SSTs), battery energy storage systems (BESS), power conversion equipment, and energy management systems, alongside data center power equipment, air and liquid cooling systems, and containerized data centers. On the server side it covers rack power, in-rack power, and board-level power. That breadth allows Delta to construct a power architecture spanning grid, data center, server, and accelerator.

Looking further ahead, Delta is also considering a "tri-brid" data center power model that does not depend on grid electricity alone, combining solid oxide fuel cells (SOFC), BESS, and grid power. In that scheme, SOFC serves as the base power source, BESS absorbs demand fluctuations, and the grid acts as a supplementary supply, reducing the load placed on the power network.

Rohm's Material Strategy: SiC, GaN, and Si in Coexistence

Implementing 800VDC depends on power semiconductors that can convert and control high-voltage power efficiently. Rohm supplies SiC, GaN, and Si power devices together with gate drivers, power control ICs, and microcontrollers, and positions itself as able to provide semiconductors suited to each conversion stage, from the high-voltage side down to the low voltages used by AI accelerators.

Conventionally, the industry has segmented materials by application: SiC for high-voltage uses such as electric vehicles and industrial equipment, GaN for power supplies requiring high-speed switching. In AI data center power, Rohm argues, SiC, GaN, and Si must be used according to role within a single system, making "coexistence" of the three materials essential. The company maps SiC to SSTs and high-voltage DC/DC conversion, GaN and Si MOSFETs to high-frequency conversion inside racks and servers, and DrMOS devices and control ICs to the region near the accelerator, combining products according to voltage, power level, and switching frequency. Rohm aims for more than 100 billion yen in AI server-related revenue in fiscal 2030, and this collaboration is positioned as a central initiative toward that goal.

Regulatory Friction: Japan's 750V Low-Voltage Ceiling

One obstacle to social implementation in Japan is regulation. Under Article 2 of the Ordinance on Technical Standards for Electrical Facilities, low voltage in Japan is defined as DC 750V and AC 600V; anything above DC 750V is classified as high voltage. In China, South Korea, the United States, France, Germany, and elsewhere, voltages up to DC 1500V are in some cases treated as low voltage, making 800VDC easier to introduce.

Deploying 800VDC in Japan may therefore require approaches that differ from overseas practice in equipment configuration, safety standards, protection functions, and installation and maintenance methods. Accordingly, the collaboration extends beyond devices and semiconductors to joint awareness and educational activities explaining the necessity, safety, and benefits of 800VDC. Delta plans to begin a proof of concept in Japan using an SST in the latter half of 2027, verifying safety and protection functions while connected to the grid; after roughly a year of verification, it aims to confirm the feasibility of domestic implementation within 2028. The two companies envision a roughly five-year horizon for social implementation.

Compressing Development Cycles from Two Years to Six Months

The partnership builds on an earlier relationship: Delta and Rohm concluded a strategic partnership on power devices for power systems in 2022, centered at the time on automotive applications. The explosive spread of generative AI subsequently expanded the data center power market, and the pace of that change has altered power-system development itself. According to Rohm, conventional power systems allowed roughly two years of development time, whereas AI servers can require support for next-generation products in about half a year.

The concern that the traditional sequence—receiving specifications from a customer and then developing a product—cannot keep up with the AI market motivated the agreement. The companies intend to share information on customers, markets, and technology roadmaps more extensively than before, and to build a structure for developing reference designs and products in advance of future demand. For Delta, working with Rohm provides a broad lineup spanning SiC, GaN, Si, and control ICs, allowing wide-ranging consideration of the semiconductors a power system needs. For Rohm, sharing future roadmaps with a globally operating power-system vendor enables development of higher-value semiconductors before customer requirements become explicit.

Roadmap, Extended Scope, and Outlook

The basic agreement also covers decarbonization and energy management at Rohm's manufacturing sites. Using Delta's energy management, energy-saving, and decarbonization expertise through ESG consulting services, the partners will examine optimization of energy use and reduction of environmental impact at Rohm's production facilities. The two companies intend to pursue efficient power supply for AI data centers and efficient energy use at semiconductor fabs as linked efforts, with future expansion envisioned toward edge data centers supporting physical AI, robotics, and autonomous driving.

The division of labor is clear: Rohm concentrates on power and analog semiconductors, while system-level capabilities are complemented through Delta. For Delta, Rohm's high-performance devices offer added value in the form of higher-efficiency power systems stretching from grid to accelerator. By promoting joint design of semiconductors and power systems from an early stage, the partners aim to match the development speed the AI era demands and to build a market and achieve social implementation for an 800VDC solution suited to Japan.