Infineon released a complete HV PDB reference design for next-generation AI data center power architectures, allowing customers to evaluate ±400V and 800V HVDC distribution systems. The system-level platform integrates hot-swap, intermediate bus conversion, power conditioning, and telemetry management to accelerate product deployment.
Overview
Infineon Technologies has introduced a complete reference design aimed squarely at the power architecture transition now underway in AI data centers. Announced on November 12, 2026, from Munich, the HV PDB (high-voltage power distribution board) is a system-level platform that allows customers to evaluate both ±400 V and 800 V high-voltage direct current (HVDC) distribution schemes on a single piece of hardware. Rather than a single-function evaluation board, Infineon has integrated hot-swap protection, intermediate bus conversion (IBC), power conditioning, and telemetry management onto one PCB, with the stated goal of reducing development complexity and shortening time to market while giving designers visibility into system efficiency, protection behavior, and coordinated power management.
Board Architecture and Power Budget
The HV PDB occupies 480 × 125 mm² and delivers up to 12 kW of output power across either distribution architecture. The signal chain is laid out in distinct stages: an input fuse, a dual-channel hot-swap module, an EMI filter, two 6 kW high-voltage IBC modules converting ±400 V to 50 V, and two closed-loop-controlled 2.5 kW IBC modules stepping 48 V down to 12 V. Notably, the dual hot-swap module is rated to support up to 32 kW and provides safe startup, fault isolation, telemetry monitoring, and system protection. That rating sits well above the board's 12 kW output, which in practice gives the front-end stage substantial headroom and makes the module reusable in higher-power derivatives of the same topology.
Conversion Chain: Silicon, SiC, and GaN Together
The most technically interesting element is the high-voltage IBC stage, which uses an all-gallium-nitride (GaN) design reaching up to 98.5% peak efficiency, feeding a regulated 48/12 V conversion stage. Infineon frames the platform as a demonstration of its combined silicon, silicon carbide (SiC), and GaN portfolio applied to next-generation AI server and data center power conversion. The architectural logic is straightforward: GaN switching devices push the high-voltage conversion stage toward higher frequency and lower loss, while the downstream regulated stage conditions the rail for point-of-load delivery. Efficiency at the 98.5% level matters at rack scale, where conversion losses compound across dozens of kilowatts and directly translate into thermal load that must be removed from an already thermally dense AI enclosure.
Digital Control and Telemetry
A dedicated MCU based on Infineon's PSoC™ C3 handles telemetry acquisition, system monitoring, and intelligent energy management. Telemetry and PMBus connectivity provide system-level monitoring and coordination, which is increasingly a requirement rather than a feature in AI racks, where operators need per-rail visibility to manage power capping, detect faults, and balance load. A PSoC evaluation board interface further allows developers to implement custom firmware, turning the board from a fixed demonstration into a programmable research vehicle.
Evaluation Flexibility and Ecosystem Compatibility
Infineon has deliberately made the board modular. Developers can run the entire power chain end to end or isolate individual stages for architecture studies, and can evaluate alternative IBC modules, EMI filter configurations, and power management schemes. This modularity is intended to build understanding of startup sequencing, fault protection, and overall system performance. The board is also compatible with industry-standard half-brick high-voltage IBC and quarter-brick medium-voltage IBC modules using standardized pinouts, so customers can slot in alternative sources that meet their specific system requirements — an important concession in a market where designers resist single-vendor lock-in on critical power components.
Market Context
The reference design arrives as rack-level power demand in AI facilities pushes conventional low-voltage distribution toward its practical limits. Higher distribution voltages reduce resistive losses for a given power level, which is the core motivation behind both ±400 V and 800 V HVDC proposals. The industry has not converged on a single architecture, however, and that uncertainty is expensive for equipment makers who must commit to a bus voltage before standards settle. By supporting both ±400 V and 800 V on one board, Infineon effectively hedges that standards risk for its customers and positions its silicon, SiC, GaN, and MCU content as the common denominator regardless of which voltage wins.
Industry Impact
Reference designs are a well-established mechanism for semiconductor vendors to seed architectures and shorten customer design cycles, but the scope here is broader than a typical demo board: it spans the protection front end, the conversion stages, and the digital management layer. That breadth gives Infineon an opportunity to influence how AI power shelves are partitioned and to place its MCU alongside its power discretes. The modular slot compatibility also signals confidence — a vendor that expects to win on merit can afford to let customers compare alternatives inside its own evaluation platform.
Implications for AI Data Centers
For operators and system architects, the significance lies in the combination of hot-swap fault isolation, per-stage telemetry, and high-efficiency GaN conversion on a single 12 kW building block. Fault isolation and safe startup are prerequisites for the serviceability models AI operators demand, while PMBus-based monitoring feeds the energy management and reliability analytics that increasingly define data center operations. A validated reference platform lowers the barrier to prototyping HVDC distribution without building a custom power shelf from scratch.
Future Outlook
The HV PDB will be generally available in November 2026 and is being shown at electronica 2026 in Munich from November 10 to 13, in Hall C3, Booth 502. The near-term question is whether HVDC architecture standardization accelerates enough for reference designs like this to become de facto templates, and whether GaN-based high-voltage IBC stages become the default as rack power continues to climb. Infineon's bet is that customers would rather evaluate both voltage architectures on one board than wait for the standards debate to resolve.