Infineon Technologies introduced a complete HV PDB reference design targeting next-generation power architectures for AI data centers. The board lets customers evaluate both ±400V and 800V HVDC distribution systems, integrating hot-swap functionality into a system-level platform to accelerate product deployment.
Overview: A Reference Design Built Around the HVDC Transition
Infineon Technologies (FSE: IFX / OTCQX: IFNNY) has introduced a complete reference design for next-generation power architectures in AI data centers. Designated the HV PDB, the board gives customers a single platform on which to evaluate both ±400 V and 800 V high-voltage direct current (HVDC) distribution systems, with hot-swap functionality folded into a system-level design rather than treated as a discrete building block. The announcement, dated 2026-11-13, positions the board as an evaluation vehicle intended to shorten the path from architecture study to product deployment.
The significance lies less in any single converter stage than in the integration. As a system-level platform, the HV PDB combines hot-swap, intermediate bus conversion (IBC), power regulation and telemetry management onto one circuit board, allowing designers to reduce development complexity and compress time-to-market while developing a practical understanding of system efficiency, protection behavior and coordinated power management. The platform is explicitly aimed at high-voltage power delivery architectures for AI server racks.
Board Architecture and the Power Chain
The HV PDB occupies a board area of 480 × 125 mm² and supports both ±400 V and 800 V distribution architectures, delivering up to 12 kW of output power. The signal chain is laid out as a complete, inspectable path from the input to the point of load:
- An input fuse at the front end, followed by a dual hot-swap module
- An EMI filter stage between the hot-swap front end and the conversion stages
- Two 6 kW high-voltage IBC modules converting ±400 V to 50 V
- Two closed-loop, 2.5 kW IBC modules converting 48 V to 12 V
This two-stage intermediate bus arrangement — a high-voltage step-down to a 50 V-class rail, followed by a regulated 48 V-to-12 V stage — reflects the reality that AI rack power delivery is no longer a single conversion problem. Each stage carries its own efficiency, thermal and control constraints, and the reference board makes those interactions observable rather than abstract.
Hot-Swap, Protection and a 32 kW Front End
One of the more notable details is the headroom built into the hot-swap stage. The dual hot-swap module supports up to 32 kW, well above the board's 12 kW output rating, and provides safe startup, fault isolation, telemetry monitoring and system protection functions. In practical evaluation terms, this means the front end is not the limiting element when designers probe startup sequencing or fault scenarios; the module can be stressed independently of the downstream conversion chain. Fault isolation at this stage is particularly relevant in HVDC distribution, where a fault propagating across a shared high-voltage bus is a system-level concern rather than a board-level one.
Efficiency: GaN at the High-Voltage Conversion Stage
The high-voltage IBC modules are built on an all-gallium-nitride (GaN) approach and achieve peak efficiency of up to 98.5%, feeding a regulated 48/12 V conversion stage. That figure matters because the high-voltage intermediate bus conversion is where switching losses and thermal density are hardest to manage. The broader platform deliberately mixes Infineon's silicon, silicon carbide (SiC) and GaN technologies, applying each where it fits rather than standardizing on a single material system. A dedicated MCU based on PSoC™ C3 handles telemetry acquisition, system monitoring and intelligent energy management — functions that are increasingly part of the value proposition of a power board rather than an afterthought.
A Flexible Evaluation Platform, Not Just a Demonstration Board
Infineon has designed the HV PDB to be reconfigured. Developers can run the entire power chain end-to-end or isolate individual stages for architecture studies. Telemetry and PMBus connectivity support system-level monitoring and coordination, while a PSoC™ evaluation board interface allows custom firmware development. The board also permits evaluation of alternative IBC modules, EMI filter configurations and power management schemes. This modularity is intended to expose startup timing, fault protection behavior and overall system performance in a way a fixed demonstration board cannot.
Compatibility extends to mechanical and electrical standards: the board accepts industry-standard half-brick high-voltage IBC and quarter-brick medium-voltage IBC modules using standardized pinouts, so customers can substitute slot-compatible solutions that match their specific system requirements.
Market Context: Why Dual-Voltage Support Matters
The AI data center power chain is in the middle of an architectural re-evaluation. Rack-level power densities continue to climb, and the industry has not settled on a single HVDC distribution voltage. By supporting both ±400 V and 800 V on one board, Infineon avoids forcing customers to commit to an architecture before they have measured it. That dual compatibility is a pragmatic hedge: it lets a design team compare distribution approaches using the same conversion stages, control firmware and telemetry framework, which removes a significant source of experimental noise from the evaluation.
Implications for AI Data Centers
For AI server racks, the interesting element is the inclusion of telemetry and intelligent energy management as first-class features. Rack-level power is increasingly managed as a coordinated resource, and a reference design that surfaces PMBus data and monitoring from the outset lowers the barrier to building that coordination into production systems. Equally, integrating hot-swap into the high-voltage domain addresses a practical operational requirement: serviceability without taking down a shared distribution bus.
Availability and Outlook
The Infineon HV PDB will be officially available in November 2026 and is being shown at electronica 2026 in Munich from 10 to 13 November, at Hall C3, Booth 502. For design teams weighing ±400 V against 800 V, the board offers a way to generate real measurements before committing silicon and magnetics to a final architecture.