The article describes a single-stage 800 V-to-12.5 V conversion architecture that uses eight GaN modules to share a 6 kW load. It argues this approach can improve efficiency for next-generation data center power delivery as demand for higher density rises.
Overview
Efficient Power Conversion (EPC) has described a single-stage 800 V-to-12.5 V DC-DC conversion architecture that uses eight GaN-based modules to share a 6 kW load. The design, reported by Elektronikpraxis on 11 November 2026, targets next-generation AI and high-performance computing servers that distribute an 800 VDC bus directly to the server board. The article is authored by Alejandro Pozo, Director of Applications at EPC. By converting from 800 V to 12.5 V in one stage, the approach eliminates the intermediate 800 V-to-48 V conversion stage, reducing system complexity and improving overall efficiency. The prototype achieves 97% efficiency at full load and 98% peak efficiency.
The ISOP Architecture
The converter uses an input-series, output-parallel (ISOP) architecture. Eight identical isolated converter modules are connected with their inputs in series and their outputs in parallel. This distributes the 800 V input voltage and the 6 kW output power across the modules, reducing device voltage stress while enabling scalable high-current operation. When the modules use LLC resonant converters, the architecture provides inherent voltage balancing and current sharing through proper resonant tank design, avoiding complex balancing control. Phase interleaving among the eight modules also reduces output current ripple and output capacitance requirements, improving both power density and efficiency. The architecture is presented as a promising solution for high-ratio 800 V-to-low-voltage conversion in next-generation AI server power systems.
Transformer and Thermal Design
The eight-module arrangement changes the magnetic design problem. A conventional 800 V-to-12.5 V converter requires a transformer turns ratio of 16:1. In the eight-module ISOP implementation, each LLC module needs only a 4:1 ratio. That lower ratio simplifies planar transformer winding design, reduces leakage inductance and winding resistance, and enables compact PCB-integrated planar transformers with higher power density. The modular architecture also spreads power losses across the board, reducing thermal hotspots and supporting effective top-side cooling. Interleaving further lowers output ripple and capacitance needs, which helps the converter meet thermal and density targets.
GaN Device Advantages
The architecture also changes the semiconductor choice. Conventional converters operating from an 800 V bus typically require 1.2 kV SiC MOSFETs or 650 V GaN devices. With eight modules in series, the nominal input voltage per module falls to approximately 100 V, allowing 150 V GaN FETs. Low-voltage GaN devices such as the EPC2305 offer low gate charge, output charge, and on-resistance, enabling efficient operation near 1 MHz. For the 6 kW converter, the eight-module GaN ISOP design achieves primary-side switch loss of 6.8 W, compared with 15.9 W using 1.2 kV SiC MOSFETs—a 57% reduction. The switch footprint falls from 630 mm² to 240 mm². These device-level advantages support higher efficiency, switching frequency, and power density.
Hardware Results
The 6 kW prototype module measures 106 mm × 47 mm × 8 mm, demonstrating high power density. Measured efficiency reaches 97% at full load with a peak of 98%. The article reports that measured switching waveforms at 1 MHz show stable resonant operation and validate the proposed design. These results matter because they show the ISOP approach working as a complete hardware prototype, not only as a topology study. The combination of efficiency, compact dimensions, and 1 MHz operation points to a practical path for high-ratio conversion in server power delivery.
Why It Matters for AI Data Centers
The design addresses a growing power-delivery problem in AI and high-performance computing servers. The adoption of 800 VDC distribution reduces distribution losses by delivering the high-voltage bus directly to the server board. Converting 800 V directly to 12.5 V for multiphase voltage regulators removes the intermediate 800 V-to-48 V stage, improving overall system efficiency while reducing complexity. However, the high step-down ratio makes high efficiency and power density difficult, especially in planar transformer design. The eight-module ISOP architecture offers a way to manage that ratio while using mid-voltage GaN devices near 1 MHz.
Future Outlook
The article positions single-stage 800 V-to-12.5 V conversion as an attractive approach for next-generation AI power delivery as data center efficiency demands rise. As intermediate bus voltages continue to decrease toward 6 V, the conversion ratio will become even more challenging. That trend makes the ISOP architecture increasingly compelling for future AI server power systems, because it can distribute voltage and power across modules, simplify transformer design, and exploit low-voltage GaN devices. The 6 kW prototype therefore serves as a reference point for a scalable 800 V power-delivery path.